Monitoring Mining GPR112 Surveying Reflector Prism M8 Thread Survey Prisma

Leica Monitoring Mining Prism GPR112 Surveying Reflector Prisma

Model: GPR112

Description:

GPR112 Monitoring-Mining Prism with M8 internal threat in the back for direct mounting and 5/8‘’ adapter.

Technical Data:

Overview:

1. For monitoring

2. With rain shelter

3. M8 or 5/8’’ threaded bolts

4. Built-in filter

5. Range 2,500m (8,200ft)

6. Large Diameter

Features:

• 60 mm long-range mining & prism monitoring
• Mounting kit with 5/8" and M8 adapters
• Weather shield to protect front of prism from rain, dust & snow

GDZ112 Rain Shelter for GPR112

Rain shelter for monitoring prism GPR112. Full availability of the prism even in rainy and snowy conditions. The rain shelter protects the prism front against rain drops, snow and dust.

Whole Set Includes:

Prism GPR112

Mounting set GHT112 for GPR112

Rain shelter GDZ112

Packing:

Paper Box

Other prisms available:

GPR1

GPR121

GPR111

GMP111

GRZ101

GMP104

GRZ4

GRZ122

MPR122

What is the offset of a Leica prism?

Similarly, if you are working with a 0mm offset prism (or reflective tape), you will need to add 34mm. You get the idea. Remember, with a Leica instrument the Prism Constant Field is actually the correction you need to enter relative to -34mm, NOT the actual prism constant (offset) of your prism.

How to set prism constants on a Leica lift?

SETTING PRISM CONSTANTS ON A LEICA TOTAL STATION First a primer on Prism Constants (also called Prism Offsets), more correctly called Absolute Prism Constants (APC). Refer to Figure 1 to understand that an EDM needs to be “told” what prism you are using to correctly calculate the distance to the Vertical Axis of the prism.

How does a survey prism work?

Survey prisms can be used with another electronic distance measurement (EDM) device to determine the distance of an object from a specific survey point, and they’re often attached to a prism pole so they can focus on a specific position.

Corner cube prisms (also called “ retroreflectors”) are often used for this type of measurement, and they will have some type of offset because the beam being transmitted from the device takes longer to leave the prism (especially from longer distances). This can be corrected by using a feature that accounts for this offset in relation to the plumb line of the surveying prism pole.

GPR112 Surveying Reflector Prism

Monitoring Mining Surveying Reflector Prism

M8 Thread Surveying Reflector Prism

Monitoring Mining GPR112 Surveying Reflector Prism M8 Thread Survey Prisma Images